Drone Builds

Most of my flight time was spent on flying FPV, and my LOS (line of sight) skill is terrible. So I decided to build a LOS quadcopter to practice with.

Armattan’s done an excellent job developing both the F1 series and Fusion 5 frames. It’s great to have the opportunity to review the limited edition frame from Armattan, the “Fusion 5”. At the moment, there’s only…

In this article we will have a look at the Alien 6″ mini quad frame. The Alien is probably one of the most popular frames currently and loved by many top FPV pilots. We will find…

Because of the lack of suitable radio receiver (always out of stock), my brushed micro quadcopter build with the Lulfro FC was left unfinished in my spare box. But finally I found a good RX alternative…

Here is a review of the the Airblade Assault 130mm – a brushless micro quad frame. We will also show you how we built the frame and how she flew.

RotoRacer RR210 is a light weight mini quad frame designed for 5 inch propellers and FPV racing. In this post Artur will show us the frame, how he built it and what he think of this quadcopter frame.

This time we are building a micro quad using MultiFlite’s Nano-B flight controller, and the Polycarbonate micro frame from Team JollyRC. I love the stackable modules, and this brushed FC can run RGB LED and buzzer.

ZMR-X210 features an X design which is currently the most popular mini quad layout. This mini quad frame has nothing like the old ZMR250 and it was created from the ground up.

NOX5 is a simple 210 Mini Quad frame that is designed for 5″ propellers, with replaceable arms.

This time we are reviewing and building the 6” TheX mini quad frame from InfiniteFPV.

Just going to show you my Speed Addict 210 build, with the most popular setup (used to) Cobra motors, Littlebee 20A Naze32 Rev6, SBUS.

Everyone should be familiar with the Tweaker 180 from ShenDrones already. This is a light weight 180mm mini quadcopter frame. And today we are going to review and build it.