One of the most useful features of FrSky radio would be telemetry. Telemetry is designed to transmit in-flight data from the radio receiver back to the radio transmitter. These telemetry data informs the pilot what is going on with the aircraft.
In this post we will have a look at the differences of mini quads running 3S and 4S lipo batteries. Many who are building their first mini quad might struggle in deciding which setup is best for them, I hope this post can answer some of those questions. I will also talk about how to move from a 3S mini-quad setup to a 4S setup, as I have been asked by FPV’ers who are looking for more power and speed.
Here is a list of useful and essential tools, spares parts you should get when building your quadcopter and drone. Some equipment listed are not necessary but will make building/flying multirotors much easier, more enjoyable and professional.
In this article I will give you some beginner’s tips about flying quadcopters, and exercises you can take to improve your skills and confidence flying a drone in FPV. Read More
Multirotors (aka drones) are fueled by LiPo battery, they are able to store and deliver large amount of power. In this guide you will learn how to read the spec of LiPo for your mini quadcopter, and how to choose and handle them safely.
I wanted to review this Eachine TX01 VTX/Camera combination, because it can potentially be used on brushed micro quads such as the Tiny Whoop, and only half the price as a FX797/FX798.
What drone pilots see while they are flying, are the low latency analog video from FPV cameras. To choose the best FPV camera for your multirotors, there are a few things to consider which we will discuss in this post.
I reviewed the iSDT SC 620 500W battery charger, which is going to replace my good old Accucel-6. Features including XT60 power input connectors and max 20A charge current.
The Foxeer Arrow HS1190 FPV camera is probably the only camera on the market that provides voltage OSD capability. And in this review we will check out the performance and how it compares to the Swift and Eagle.
We have tested the new Cobra Champion 2205 2300kv motors. This review is purely based on flying experience and impression about these motors, thrust data was not measured.
I got this RCbenchmark 1520 thrust stand to replace the Turnigy thrust stand I have been using for my motor, ESC and propeller testing. Here is a quick comparison and review.