The RF PowerMeter V2 from ImmersionRC allows you to quickly check if your VTX and radio transmitter are performing optimally. It can give you an accurate reading on how much power your transmitter is actually putting out.
I spent the last 2 months designing/testing this 3D printed brushed micro quad frame, and I am finally happy with the result and it’s now available for purchase :)
The other day, my quad dropped from about 50 feet because I accidentally disarmed my quadcopter mid air and crashed. Sascha (aka Arakon) was kind enough to shared with me how he setup his switches and modes to avoid this from happening.
You might or might not have noticed there is a little difference to the website domain name. Yes it’s been changed! :)
There have been many questions about DAL prop branding in the FPV community, and whether DAL, DALRC, and DALProps are the same company. RadioC emailed me and help clear up some of the confusions, and it’s actually an interesting read :) If your next DAL prop feel different this might be why.
Whether PPM is analog or digital signal has always been a controversial debate. In this article we will discuss the question from a RC stand point.
Today is the last day of 2015 so I would like to wish everyone happy new year, also we will have a look at what we achieved this year.
Ever wondered if Father Christmas delivered gifts on a quadcopter? In this little “project” I sat Santa (a stuffed soft toy, doll) on my mini quad, and with a rear facing camera, we can capture footage of Santa flying my quadcopter!
Xiaomi Yi Camera is great value and produces some pretty decent image. However many units have focus problems, probably due to poor quality control. It’s not the end of the world and it’s fixable.
Angled motor mounts allow the motors to be installed at a tilted angle on a quadcopter, and it’s currently a popular accessory in the FPV mini quad community. In this article I will explain the benefits of using angled motor mounts, and how to use them on a mini quad.
For radio receiver, there are a few output signal formats. The traditional and also most common type of RX signal is the PWM and basically PWM requires 1 cable per channel. PPM is now getting more and more popular, because it can handle all 8 channels in 1 signal wire.