You can change Betaflight settings from your Taranis TX using LUA script. Adjustable parameters including PID, rates, looptime, filters and VTX settings . In this tutorial I will show you how to set it up step by step.
This article shows you how to modify PID and VTX settings from your Taranis TX in RaceFlight Revolt flight controller, with the help of Lua script.
This tutorial explains how to change PID, rates and VTX settings from a Taranis transmitter using LUA script, in KISS flight controller.
Artur’s last build this year is the Helix ZX6 from ImpulseRC, here he shares his impressions and some photos after building this quad.
QAV-ULX is a 5″ mini quad racing frame by Lumenier. It’s designed to use as little material as possible (thus the skinny arms), and the result weights only 45g!
We have tested the new Cobra Champion 2205 2300kv motors. This review is purely based on flying experience and impression about these motors, thrust data was not measured.
In this article we will review & build the Zuul Racehound V2 frame (Hovership), which is a H mini quad frame with replaceable arms.
In this tutorial we will explain the steps to update KISS 24A ESC v1.01, to newer firmware version. Also how to flash firmware in the KISS FC GUI Configurator.
Artur shares his experience pairing KISS flight controller with non-KISS ESC’s (BLHlie) on a Mini Quad.
We reviewed the 5 inch Menel Mini Quad frame not long ago, now let’s take a look at it’s little brother, the 3″ Menel X3 from Hibernagen.
Tiny Whoop became very popular in recent months, so we jumped onto the hype train, and looked into how to build a Tiny Whoop Inductrix micro quad :)
We have tested the newly released Cobra motors: 1806 2800kv and 2204 2850kv designed for smaller (150-180) frames and 4″ props. The tests was purely based on flying experience, with different props / frame sizes etc. Thrust data was not measured.