The Rocket Lite from GEPRC is a tiny “bind and fly” FPV drone with 2″ propellers. It comes with Caddx Vista installed and is compatible with DJI FPV system. Some said it’s one of the best pre-built DJI micro drones, but is it?
I have always wanted a small pre-built FPV drone with DJI FPV System (under 250g), so I can fly in my local parks. The HGLRC Sector132 does exactly that! It’s not super powerful, but nimble and functional, the more I fly the more I enjoy it!
Thought the image from DJI FPV system look good? Now it will look even better with the higher bitrate setting from the latest 01.00.60 update on 8th of July 2020. The original 25Mbps bit-rate can be bumped up to 50Mbps.
The Caddx Vista Air unit was the lightest DJI HD camera/transmitter you can put in your drone, I said ‘was’, because they just released an even lighter camera, the Caddx Nebula! However, I am quite disappointed!
The DJI Remote Controller is so well made and nice to use, I could almost make it my daily driver. However it’s missing something that stops it from being my primary radio.
I will show you how to setup and use DJI FPV system with Betaflight. This tutorial will cover activation, wiring and installation in an FPV drone, pairing between FPV goggles, Air Unit and Remote controller, finally the basic operations.
This is probably the best analogue adapter for the DJI FPV goggles I’ve found. Thanks so much to BDI for sending this kit over for the review!
In this article I will share information on how to get started flying DJI Drones, as well as accessories that i fine useful. These simple steps are crucial in the process of going from a novice with DJI equipment, to having a great understanding of all its features and how to make your aerial videos seem more professional.
This article is an in-depth look at the current consumer drones that DJI has to offer. DJI drones are indisputably the top choice when it comes to aerial cinematography. DJI is the largest drone company and they make solid products that are packed with features to make your flying experience as easy as possible.
Updating firmware for the DJI FPV system cannot be easier, in case you haven’t read the manual you should find this tutorial useful :) The steps are exactly the same for the DJI FPV Goggles, Air Unit and Remote Controller.
Here is a hack to enable 1200mW on your DJI FPV Goggles and Air Unit Output Power. However, please make sure you follow your local regulations regarding radio transmission power and frequency.
FCC mode allows you to have access to the full 700mW output power and 8 channels, while the CE mode only supports maximum 25mW and 4 channels available. I will show you how to easily switch to FCC mode in this tutorial.