hglrc

The HGLRC Sector X5 (V4) is a BNF FPV Drone. It’s well designed and functional, packed with speed and power. It’s been pre-configured and tested in factory so you can almost just take it out…

The HGLRC Thor Pro is a parallel charging board with built-in fuses which is an important safety feature for parallel charging LiPo batteries. In this review I will show you the quality and features of…

Imagine 15 mins flight time on a 3″ FPV drone using just a single 18650 Li-Ion cell. HGLRC and Dave_C collaborated and released a pre-built model – the Rekon 3 Nano Long Range FPV drone.

HGLRC Zeus Nano VTX is a compact video transmitter that can fit in almost all micro quads with its special, flexible mounting solution. It has a microphone, has plenty of output power, and weighs under…

I have always wanted a small pre-built FPV drone with DJI FPV System (under 250g), so I can fly in my local parks. The HGLRC Sector132 does exactly that! It’s not super powerful, but nimble…

This is a review of the Veyron 3 Cinewhoop from HGLRC. I will take a close look at the quad and point out the good and bad. Finally I will show you how to set…

The 20x20mm HGLRC Zeus35 has FC, PDB and ESC all integrated into one single board. This powerful little FC is designed with 2″, 3″, 4″ and even 5″ FPV drones in mind, but can one…

HGLRC is taking a different approach at the “toothpick” style ultra-light micro quad. They are using bigger motors with much lower KV and pair with heavier triblade props. I can’t wait to try this out!…

So this is the first time I build a “toothpick” style micro quad from scratch and not buying a pre-built kit :) This should be fun as I get to choose my own hardware!

This week I am building a new 5″ quad that runs 6S LiPo. The goal of this build is to test new technologies of a few products, and new features in Betaflight. There are new…

Here is an overview of the Forward 65A 4in1 ESC HGLRC just sent me. I will go through the specs and features of this ESC, and look at it closely before putting it in a…

It’s time to build another 3″ quad! This time I will be using parts mostly from HGLRC – the first time I am checking out their products.