Races can take place anywhere: warehouse, parking lot, in the forest, or simply on an open field with obstacles. Just like any other types of racing, the goal is to go through the course without crashing.
In the newest version of OpenTX, a new dialog box has been added when you try to bind a Frsky receiver to your Taranis. There are four options, “Channel 1-8 or 9-16, and Telemetry On or Off. This article will explain what these options mean.
One benefit of setting up GPS on a drone is to get real time GPS coordinates – so when you crash you can track down your model. You could display them in your OSD, but that’s only useful when you have video signal or to look back in the DVR. In this guide I will show you how to record GPS coordinates inside the Taranis.
You might wonder, “isn’t Crossfire faster than SBUS? Why would you still want to use it?” Well yes, you should use CRSF over SBUS whenever possible. Crossfire requires both RX and TX pins of a UART while SBUS only needs the RX pin. When you don’t have a spare UART that then your next option would be using SBUS.
Some people love listening to motor noise during flight because it makes them feel more connected to the quadcopter. This tutorial will explain the different ways of getting audio for FPV, and discuss other benefits of doing so.
Lipo battery balance plug can sometimes be damaged by spinning propellers in flight. it’s extremely unsafe to use this LiPo with a broken balance lead as it can short itself easily and cause fire. In this article I will show you how I fixed mine.
The Holybro Kakute F4 and F7 flight controllers now support Ardupilot firmware for more advanced and reliable GPS capability. Features include “Return to Home”, “GPS Way-Point” and “Position hold” etc. In this tutorial I will show you how to flash Ardupilot firmware on the Kakute F4 and F7 FC.
In this tutorial I will show you why and how to setup GPS in Betaflight for a quadcopter. I will also explain which is the best GPS module to get.
RSSI is a measurement of how good the radio signal is between your RC transmitter and receiver. It stands for Received Signal Strength Indication, and is an important safety feature. It helps avoid loss of radio signal, which could lead to unexpected crashes, damage to your quadcopter and other people’s properties.
Before throwing away damaged or old LiPo batteries, you should first drain them completely until there is no charge left. In this article I will show you how to build a battery discharger using high power resistors.