mini quad

I received some propellers to try out from DYS and Xperdrone (Hobby Cross). They have various sizes: 3 inch, 4 inch, 5 inch and 6 inch. I ran some thrust test on them comparing to HQ and…

RotoRacer RR210 is a light weight mini quad frame designed for 5 inch propellers and FPV racing. In this post Artur will show us the frame, how he built it and what he think of this quadcopter frame.

DYS’s new SE2205 motors addressed quite a few issues we have been hearing on the RS2205 and some other popular quadcopter motors, performance is top of the league too, check it out.

ZMR-X210 features an X design which is currently the most popular mini quad layout. This mini quad frame has nothing like the old ZMR250 and it was created from the ground up.

NOX5 is a simple 210 Mini Quad frame that is designed for 5″ propellers, with replaceable arms.

This time we are reviewing and building the 6” TheX mini quad frame from InfiniteFPV.

KISS FC is a F3 flight controller designed by Flyduino for Mini Quad. In this post we will walk through the features of the KISS FC, compare it to CleanFlight/Betaflight, and explain briefly how to set it…

The EMAX RS2205 motors are awesome! From my thrust result they completely destroyed the Cobra motor.

Flyduino kindly sent us a set of the new KISS 24A ESC Race Edition (RE) to try out. In this post we will go through the key features, performance testing, and finally some guides on…

Raceflight is a latest flight controller firmware. By taking advantage of the processing power of F4 flight controllers, it’s able to run at 8kHz and brings the looptime down to 125 (uS). We will also talk about…

Just going to show you my Speed Addict 210 build, with the most popular setup (used to) Cobra motors, Littlebee 20A Naze32 Rev6, SBUS.

Get ready for the Mitsuko 150 Frame! Unlike most of current mini quad frames that have X configuration, the Mitsuko is a plus + frame. It’s as tiny as a 150mm frame but capable of running 4…