Some good news for those who are looking for a cheap micro brushed FC, and only want to run Frsky TX. I managed to connect a PPM receiver to the Micro Scisky board (aka Quanum Pico).
Enable PPM on Micro Scisky FC with External Receiver (Quanum Pico)
Tag Archives: ppm
Is PPM Signal Analog or Digital?
Whether PPM is analog or digital signal has always been a controversial debate. In this article we will discuss the question from a RC stand point.
PPM vs SBUS – D4R-II vs X4R-SB
There have been a lot of discussion on using SBUS over PPM for radio receiver. Here we will have a look at the differences and the advantages of SBUS over PPM.
DIY PWM to PPM Converter for 2.4GHz Receiver using Arduino
For radio receiver, there are a few output signal formats. The traditional and also most common type of RX signal is the PWM and basically PWM requires 1 cable per channel. PPM is now getting more and more popular, because it can handle all 8 channels in 1 signal wire.