The Micro Swift 3 FPV Camera is using a standard size M12 lens for better image quality, as well as the latest UART camera control technology! In this review we will take a close look at the new features and improvements.
The Runcam Camera Control Adapter converts the OSD pin on an FPV camera to a UART interface. This allows you to use the UART port on the flight controller for Camera Control without the need for additional resistor and capacitor.
Looking for recommendation of 4S LiPo batteries for 5″ and 6″ FPV mini quad? In this article we revealed some of the best batteries recommended by the community in April 2017.
Spoiler alert: the new Foxeer Monster Pro FPV camera has really good looking image! It’s a mini size CMOS 1200TVL camera and I’ve heard they making a micro version too.
Today we are testing the Fusion 4S 1500mAh LiPo battery from DemonRC. It’s labelled 666C which is joke as it’s the devil’s number. This is funny but it doesn’t tell us what to expect though so it would be interesting to find out how it performs.
Onboard DVR is a way to record FPV videos in the best possible quality without all the signal interference from your VTX, by installing a DVR in your mini quad or any RC model really.
The Dragonfly Hurricane 2207 motors from FPVModel are affordable yet feature some of the latest designs in mini quad motors. In this review we will take a close look at the build quality and features.
In this article we will recommend some of the best mini quad ESC based on my personal experience as well as community feedback and reviews. We will cover the pro’s and con’s of each ESC, and what should consider for your next build!
Runcam is releasing yet another FPV camera, this time, the Micro Sparrow V2! I am actually quite excited about this one because it seems to provide nearly the same performance as the Foxeer Predator, but the extra image settings make it a better camera.
In this review, I tested some popular 6S LiPo batteries for racing drones and mini quads, comparing their performance including capacity, discharge rate, and internal resistance.
The Amaxinno 5-inch FPV Racing Drone frame is the 2nd ultralight frame we reviewed in a row. In this article we will go through the details of the frame, build it and test it.
The Returner R3 2206 1720KV is designed primarily for long range 4S quadcopters running 6″ or 7″ propellers. However, this is not what I am using them for :) Although these motors are only rated for 3S and 4S, I was told by Brotherhobby they can support up to 6S on 5″ props thanks to the low KV… Are you ready for some POWAH ?!