I have built and flown many different Tiny-Whoop-style micro quad‘s, so far the BeeBrain V2 Tiny Whoop is by far the best experience I have had. Check out this build log and review to find out more.
Build: BeeBrain V2 Tiny Whoop from Newbeedrone
Tag Archives: tiny whoop
Review: X-Racer X1 Micro Racing Drone – the Tiny Whoop Killer!
Seriously, the X-Racer X1 could be the Tiny Whoop killer. In this review we are going to have a look at the micro racing drone that FPVModel spent a long time developing.
AcroWhoop FC + Eachine E010
I am just trying to install the AcroWhoop FC on the Eachine E010 micro quad, so I can bind the Taranis directly with this quad and fly in full Acro mode.
BeeBrain FC For Inductrix Tiny Whoop
The BeeBrain V1 is the first custom designed flight controller to fit the Blade Inductrix (AKA Tiny Whoop). It can run both Cleanflight and Betaflight, allowing the user to adjust PID and fly in full rate mode.
Review: Eachine TX01 25mW VTX Camera
I wanted to review this Eachine TX01 VTX/Camera combination, because it can potentially be used on brushed micro quads such as the Tiny Whoop, and only half the price as a FX797/FX798.
NewBeeDrone Inductrix Upgrades – FX798SC and 210mah Battery
In this article we will check out some upgrade parts for the Tiny Whoop from NewBeeDrone – the StingerVision FX798SC FPV setup, and Nitro Nectar Lipo batteries.
Binding Eachine E010 to Taranis TX (Inductrix Tiny Whooop Clone)
In this post we are going to explore the possibility of binding the Eachine E010 to a proper radio transmitter for better stick control.
Mods for the Eachine E010 Tiny Whoop – #1
In this post I will share 3 modifications I have done on the Eachine E010, hoping to make it fly better. Not all of them worked though but it was nice to try different ideas :)
Eachine E010 for FPV – Cheap Alternative to Tiny Whoop & Inductrix
The Eachine E010 is an affordable Inductrix Clone, with the same mod you can turn it into something similar to a Tiny Whoop, but much cheaper.
Can Tiny Whoop Run Betaflight or Cleanflight?
Tiny Whoop is great, but how about running Betaflight or Cleanflight on it? Now it’s possible and there is more than one option.
Whoopee Micro Quad Build – with Scisky FC
Whoopee is probably the best thing I have created with my 3D printer so far :) It flies really really well indoor, and it’s not hard to build.
Whoopee – Inductrix “Tiny Whoop” Frame for 8.5mm Motors
Whoopee is a “Tiny Whoop” like, 3D printed micro quad frame. It’s designed to fit 8.5mm motors and many Cleanflight-compatible FC. Whoopee’s 3D printing files are free to download, you can also purchase it from us.