LQ and RSSI can be confusing for first time TBS Crossfire users. In this tutorial I will try to explain what the differences are between LQ and RSSI in Crossfire. I will also show you how to set it up in Betaflight and OpenTX on the Taranis TX to monitor your link quality and range.
For long range flying, RC links is just as important as your FPV video link. In this review we will have a look at some long range RC options: the Frsky R9M and TBS Crossfire. These are the two most popular TX modules compatible with the Taranis X9D and QX7 transmitters.
The iRangeX IR8M radio transmitter is a multi-protocol TX that is compatible with Frsky, Spektrum DSM2/DSMX, Flysky, Walkera and many other radio systems. In this article we will take a look at the product spec and discuss the possible pro’s and con’s.
Adjusting the tension in your Taranis TX Gimbal sticks can make a big difference to your flying. In this tutorial I will show you how to loosen/tighten the transmitter gimbals for better performance.
The Frsky Taranis Q X7S is an upgraded “Special” version of the popular Taranis Q X7. In this article we will take a look at the improvements on the QX7S, and help you decide whether the changes are worth the extra cost.
As part of setting up a quadcopter or racing drone, it’s very important to make sure your transmitter sticks match the radio signal received in the flight controller. You quad would fly more accurately and reliably with the correct channel end points and mid points.
This tutorial explains the basics of a radio transmitter (RC Controller) and what you should look out for when buying one: price, the number of channels, modes, frequency and other features.
This is a review of the Taranis Q X7 by Frsky, a RC transmitters (TX). It’s just been released, and it’s the younger sibling of the Taranis X9D – probably one of the most popular TX among FPV mini quad pilots.
FrSky just released the new M9 Hall gimbal for Taranis X9D radio transmitters, it was a much awaited upgrade for Taranis users. In this article, we will compare the new gimbal to the stock Taranis X9D, and demonstrate the installation.
The Quanum i8 TX is specifically designed for the multirotor users. In this review we are going to explore the features of this radio transmitter.
We talked about what makes a good radio transmitter for multirotors and quadcopters, however it’s still a difficult decision for many new to the hobby. Some are more expensive but rich in features, some are cheaper and comes with potential for lots of upgrades. When Artur started he bought the Spektrum DX6i as his first radio transmitter controller, and recently he purchased the FrSky Taranis X9D Plus.