Review: BetaFPV 1S Battery Charger with BT2.0 Connectors

by Oscar

If you own 1S LiHV (LiPo) batteries with BT2.0 connectors, you might be interested in this charger by BetaFPV.

Some of the links on this page are affiliate links. I receive a commission (at no extra cost to you) if you make a purchase after clicking on one of these affiliate links. This helps support the free content for the community on this website. Please read our Affiliate Link Policy for more information.

Learn about BT2.0 connectors here.

Where to Buy?


Specs and Features

It’s plug and play for BT2.0 batteries.

Charges up to six 1S batteries individually at the same time.

It takes 3S or 4S LiPo as power supply, they also sell wall adapter if you want to power it with AC.

It shows you the input voltage in real time.

LED indicators for charging status (red means charging, green means finished)

Leave a Comment

By using this form, you agree with the storage and handling of your data by this website. Note that all comments are held for moderation before appearing.


vaskozl 8th June 2020 - 9:35 pm

I’m using a 12V 1.5A adapter. The spec sheet of the voltage says it should be fine up to 20V. I wouldn’t use 12V, 1A (12W) or below as that we would overdraw it.

Joel 31st May 2020 - 2:46 am

Can I use my own AC adapter or must I use theirs? What’s the input voltage?