If your BLHeli_S ESC died or is simply not responding after getting a “Flash Failed” error, or somehow your ESC is bricked, you can try re-flashing BLHeli firmware through the C2 Interface to “revive” it.
Tag:
blheli
-
-
If you don’t have a buzzer on your FPV drone, you can setup ESC beacon and use your motors as lost model alarm replacement. It’s the same as the start-up beeps that the motors make…
-
We have official BLHeli_32 confirmation from BLHeli Developers. Let’s find out what it is about, what advantages it brings, and what changes there are moving forward.
-
BLHeli Configurator is a chrome app, similar to Cleanflight/Betaflight configurators. It’s the first cross-platform ESC programming/flashing tool for BLHeli. In this post we interviewed the software creator, Andrey Mironov, and find out what’s so special…
-
Artur shares his experience pairing KISS flight controller with non-KISS ESC’s (BLHlie) on a Mini Quad.
-
Anton from CapeFPV team shared with us how to get better and more linear throttle response, by doing ESC (BLheli) and flight controller (Cleanflight) calibration and configuration.
-
In this article we will discuss some of the latest ESC development and hot topics: BLHeli_S firmware, hardware PWM and 32 bit MCU. This article is created by Adriel Perkins.
-
Do you know that you can now change settings on your ESC in BLHeliSuite, via your flight controller? That’s right, no complicated programming tool, USB linker or Arduino. All you need to do is just…