Drone Builds

The GEPRC Vapor BNF is a solid choice right out of the box—well-tuned, well-built, and ready to fly. But like many Bind-and-Fly (BNF) quads, there’s always room for improvement. Whether you’re aiming for better performance, …

In this comprehensive tutorial, I’ll walk you through the process of building an FPV drone from scratch, providing detailed guidance for both analogue and digital FPV systems. We’ll cover everything from selecting the right components, …

The FPV community is always pushing the limits, and when I heard about the possibility of building an 8S freestyle drone, I knew I had to try it. In this build log, I’m sharing how …

The last time I posted a Tiny Whoop DIY build guide was eight years ago! Since then, the FPV world has seen impressive advancements, and now you don’t necessarily need to build your own Tiny …

The goal of this build is to make a 7″ FPV drone as affordably as possible while still achieving more than 5km range. I managed to source all the components for around $150, delivering performance …

In this post, I will share my 3″ Toothpick build (a sub-100g micro FPV drone) using the latest Flywoo GOKU F405 1-2S 12A AIO FC. This quad will be using the Walksnail FPV system and …

In this tutorial, I’ll walk you through the process of building an 5-inch FPV drone with analog FPV systems. It will cover everything from selecting the right components, to wiring and assembly, and even share …

Today, I am building a 3.5-inch FPV drone with DJI O3 Air Unit. While 5-inch drones offer power and excitement, they can be quite heavy and a bit intimidating to fly in smaller parks. That’s …

I took a 2-year break from fixed wings, it’s about time for a new build. Portability and efficiency have always been the most important considerations in planes for me, and the Hee Wing T1 Ranger …

The Eachine Tyro79 Pro is possibly the cheapest 4S 3-inch FPV drone kit you can buy in 2022. It comes with all the components required except the RX and LiPo. It’s a pretty good kit …

I broke an arm on my GEPRC Smart 3.5″ drone when testing the GoPro Hero10 Bone. It was impossible to get a replacement bottom plate in Europe (it’s a unibody design), the only option was …

I’ve always wanted a micro park flyer that can carry the Naked GoPro, so I converted a 3″ ultralight FPV drone (toothpick). The AUW is only 135g and it hovers at 20% throttle. It’s so …