
Looking for a portable charger for travelling, with USB Type-C interface and takes 5V as input power? Check out the iSDT URUAV PD60 LiPo charger! It takes up to 20V as input so you can power it with 4S LiPo too.
Looking for a portable charger for travelling, with USB Type-C interface and takes 5V as input power? Check out the iSDT URUAV PD60 LiPo charger! It takes up to 20V as input so you can power it with 4S LiPo too.
Don’t like parallel charging? Then you should consider getting a multi-channel charger. The ToolkitRC M6D is a 2-port LiPo charger that allows you to charge 2 completely different batteries at the same time.
The iSDT Q6 Nano is the cheapest and smallest LiPo charger iSDT ever made. I’ve been using their chargers exclusively for over 4 years now without a single problem so I am excited about this one. I will go through the features and compare it to other small LiPo chargers.
I really like iSDT chargers, but they didn’t come with a power supply and so often beginners were unsure as to what to get. Finally iSDT released the new 608AC charger that comes with a PSU, and it’s in a very portable form factor too.
The ToolkitRC M6 LiPo Battery Charger is super small, portable and affordable. It also has some cool features that are missing in other popular higher end chargers.
The iSDT Q6 LiPo charger has been my recommendation since the SC620 was discontinued. In this review I will explain the different options and why this is a great charger for LiPo battery.
A lot of LiPo chargers like the Q6 cannot reach their maximum output power and current when you’re running it at low voltage such as 12V. To get the most out of your Q6 charger, you need a 24V power supply.
If you want to charge multiple LiPo batteries at the same time but don’t like parallel charging, you should check out the SkyRC E4Q – a low cost 4-channel LiPo charger.
In this article we will reveal the best LiPo battery chargers recommended by many mini quad pilots and racers. These Lipo chargers excel at reliability, ease to use, power and features.
iSDT LiPo chargers are great and I’ve been recommending them a lot, but they aren’t the most accurate when it comes to voltage reading. The error is usually quite small and shouldn’t be something to worry about. But it’s always good to check and here is how you can calibrate a iSDT LiPo Charger.
The Charsoon Antimatter 300W LiPo charger is a powerhouse and it doesn’t lack performance nor functions. This small charger can output a hefty 300W or 20A on 4S and should be perfect for most mini quad charging needs.
Some modern LiPo chargers are able to charge multiple battery packs at once. However they require large power supply to meet the current demand. Dedicated PSU’s are costly, so in this post we will show you how to make a cheap DIY PC/server PSU for chargers and workbench.