DJI O4 Pro and O4 Lite Air Units: What We Know So Far About These Leaked Products

The FPV community is buzzing with excitement about the upcoming DJI O4 Air Units. Leaks hint at two versions: the DJI O4 Pro (K2) Air Unit and the DJI O4 Lite. DJI is expanding its lineup in a way that may shake up the FPV market, as these new Air Units offer exciting upgrades, improved performance, and competitive pricing. Here’s a breakdown of the most intriguing details about the DJI O4 Pro and O4 Lite Air Units.

Some of the links on this page are affiliate links. I receive a commission (at no extra cost to you) if you make a purchase after clicking on one of these affiliate links. This helps support the free content for the community on this website. Please read our Affiliate Link Policy for more information.

Disclaimer: All info in this post is based on online leaks and speculations, so take it with a grain of salt.

What’s DJI O4 Air Unit?

The DJI O4 Air Units are camera and video transmitter modules that are capable of transmitting HD video while recording high-quality footage that rivals high end action cameras. They reduce the weight and cost of your drone without using a action camera and simplify your setup. The 04 Pro focuses on higher-end features, while the 04 Lite offers a lighter, budget-friendly alternative. Both units are expected to support Betaflight OSD, improved image quality, and DJI’s RockSteady 3.0 stabilization technology.

DJI O4 Pro

Specifications

• FPV Live Feed: 1080p 60Mbps on Goggles 3 and N3 (1080p 50Mbps on Goggles 2 and Integra)
• Onboard Recording: Up to 4K 60FPS at 130Mbps, supports D-Log M
• Storage: MicroSD Card Slot
• OSD Support: Betaflight & iNav
• Image Sensor: 1/1.3″ F2.0
• Antenna: Dual Antenna
• Built-in Stabilization: RockSteady 3.0
• RF Output: 33dBm
• Input Voltage: TBD
• Camera Size: 20mm wide
• Air Unit Size: 33.5 x 33.5 x 13mm
• Mounting Options: 20×20mm and 25.5×25.5mm
• Weight: 31g
• Rumored Price: Around $210

Here’s a comparison table between the DJI O4 Pro and DJI O3 Air Unit:

* DJI’s FPV systems are known to have a hard range limit, which is related to software constraints rather than hardware. The exact hard limit for the DJI 04 Air Unit is currently unknown. The claimed maximum range for the Avata 2 (which also uses the O4) is 13 km, but I suspect it will exceed that. For reference, the DJI Avata (V1) using the O3 system is advertised at 10 km but has a real-world hard cap of 23 km. Testing the true range of the O4 system with the Avata 2 isn’t feasible because its battery won’t last long enough for such distances. We’ll have to wait for further testing after its release to confirm.

The O4 Pro’s camera quality is expected to receive a major upgrade over the DJI O3, featuring a 1/1.3″ sensor and an F2.0 aperture for improved low-light performance. The O4 Pro is expected to share similar image quality to the Avata 2 drone, however, the larger aperture should offer even better low-light capability than the Avata 2, which has an F2.8 aperture.

Here’s a sample footage of the Avata 2:

In terms of FPV live feed, the 04 Pro is capable of transmitting 1080p video at 60Mbps to the DJI Goggles N3 and G3 (1080p 50Mbps on Goggles 2 and Integra), similar to the Avata 2 in that regard.

DJI O4 Lite

Specifications

• Input Voltage: 1S to 3S
• FPV Live Feed: 1080p 60Mbps on Goggles 3 and N3 (1080p 50Mbps on Goggles 2 and Integra)
• Onboard Recording: 4K 30FPS
• Storage: Built-in 26GB Memory (No SD Card Slot)
• OSD Support: Betaflight & iNav
• Image Sensor: 1/2″
• Built-in Stabilization: RockSteady 3.0
• RF Output: 30dBm
• Camera Size: 14mm wide
• Air Unit Size: 30 x 30 x 6mm
• Mounting Options: 20×20mm and 25.5×25.5mm
• Weight: 10g
• Rumored Price: Around $120

The O4 Lite targets the micro FPV market, weighing under 10 grams and featuring a single-board design, which could make it a game-changer for micro quad builds such as cinewhoops, toothpicks or even tiny whoops. The 04 Lite is expected to be on par with the DJI Neo in image quality, making it an attractive option for lightweight setups.

Racing Mode for Ultra-Low Latency

A new Racing Mode promises to reduce latency to as low as 15ms on the O4 Pro and 20ms on the O4 Lite when used with Goggles 3 (G3) and N3. This could be a game-changer for FPV racers, offering faster response times that improve control and reduce the chance of desync during high-speed maneuvers. However, Racing Mode is only compatible with Goggles 3 and N3; if you’re using Goggles 2 or Integra, you may experience slightly higher latency.

Final Thoughts

While we’re still awaiting the official release, the leaked features and specifications of the DJI O4 Pro and O4 Lite Air Units paint an exciting picture for the future of FPV flying. From advanced image quality and low-latency Racing Mode to user-friendly mounting options and lighter builds, the O4 series is shaping up to be a versatile solution for a wide range of FPV enthusiasts.

Stay tuned as we continue to keep an eye on DJI’s official announcements. If the O4 Air Units and N3 Goggles are as capable as the rumors suggest, we’re looking at a significant evolution in DJI’s FPV offerings, and potentially a new standard in the digital FPV market.