If you’re looking for an FPV drone that offers more than just slow, beginner-friendly flights, the HGLRC Draknight RTF (Ready-to-Fly) bundle might be exactly what you need. It’s one of the best micros I’ve reviewed in 2024. Priced under $300, you get almost everything required to start flying FPV, but you can also purchase this 2-inch drone separately and use your own gear. In this review, I’ll share my experience with the Draknight, exploring its features, performance, and why it stands out among beginner FPV drones.
New to FPV? Check out my FPV Drone guide for beginners: https://oscarliang.com/fpv-drone-guide/
Table of Contents
Where to Buy
The HGLRC Draknight is available as a standalone FPV drone or in an RTF kit that includes goggles and a radio. You can get it here:
- AliExpress: https://s.click.aliexpress.com/e/_DeRjVXt
- GetFPV: https://oscarliang.com/product-arru
- Amazon: https://amzn.to/3MkkbGz
The HGLRC Draknight RTF kit comes with everything you need to get started:
- The Draknight 2S drone
- Two 2S 720mAh LiPo batteries
- A simple LiPo charger with storage charging capability
- A USB-C charging cable
- The HGLRC C1 remote control with built-in 18650 batteries
- A light module bay that supports Crossfire
- A neck strap for the remote
- DM KR FPV goggles with adjustable myopia range
- A variety of accessories, including extra props and a camera mount
Specifications
Draknight Drone | Radio | Simulator Dongle |
---|---|---|
Flight controller: SPECTER12 ES2-4S AIO | Radio Link: ExpressLRS 2.4GHz | Built-in ELRS Maximum supported frequency: 250hz |
MCU: STM32F411 | Packet rate: 250Hz | Receiving distance: more than 200m |
GYRO: ICM42688P | Gimbal sensor: potentiometer | Binding method: Quickly power on and off three times to enter binding mode |
Built-in receiver: ExpressLRS 2.4G (UART) | Antenna: built-in ipex1 generation copper tube antenna | Interface: USB TYPE-C+USB TYPE-A double plug |
Built-in VTX: 0-25-100-400mW (adjustable) | Working voltage: 6-8.4v DC | Working voltage: 5v |
ESC Current: 12A (15A Burst) | Range: 500m+ | ELRS firmware upgrade method: WIFI or USB plug |
ESC Protocol: Dshot | TYPE-C for charging and firmware flashing | ELRS firmware version: ELRS 3.0 |
ESC firmware: (Bluejay) | 3.5MM analog trainer port | ELRS Firmware Name: HGLRC 2.4 GHz, HGLRC Hermes 2.4GHz RX |
FC firmware: HGLRCF411SX1280_15A | Battery: 18650 flat head battery x2 | External receiver support protocol: only supports CRSF protocol |
FC input voltage: 2S-4S (Lipo) | Charging: TYPE-C charging current 1.2A, The charging time is about 3-4 hours | Weight: 9.5g |
Mounting hole: 25.5X25.5mm M2 | Remote control channel: 8 channels | Size: 74mm x 21mm x 12.5mm |
Motor: SPECTER 1003 10000kv | Bluetooth: Bluetooth 4.2 | / |
Propeller: Gemfan2023 propeller | ELRS firmware upgrade method: WIFI or TYPE-C USB flash | / |
Weight: 44.3g | ELRS firmware version: ELRS 3.0 | / |
/ | ELRS firmware name: DIY devices 2.4 GHz DIY ESP32 + E28 2.4GHz TX | / |
/ | Weight: 195g (excluding battery) | / |
/ | Size: 160mm x 130mm x 50mm (excluding remote control) | / |
Build Quality and Design
The first thing I noticed was the robust build quality of the Draknight. The frame feels solid and the design suggests it can take a few hits, which is crucial for beginners still learning the controls.
Weighing in at 44g without battery and equipped with an included 2S 450mAh LiPo, the Draknight is ready to deliver some serious performance. It’s slightly heavier than some competitors, like the Emax Tinyhawk Freestyle, but the aluminum frame adds durability—something often lacking in ultra-lightweight drones.
The 10,000KV brushless motors provide plenty of power, ensuring this drone can handle everything from gentle cruising to more aggressive freestyle maneuvers.
Radio
The Draknight can be purchased separately, but if you don’t own any gear, the RTF kit comes with a radio and FPV goggles, making it perfect for beginners on a tight budget. The drone can also be used with other ExpressLRS radios and analog goggles when you decide to upgrade your gear, adding versatility.
The remote controller is simple, with built-in ELRS (ExpressLRS) support. It has no screen, so you can’t change radio settings easily, but I didn’t find the need to change any settings during my testing. It’s paired with the drone right out of the box and gets the job done.
The radio is powered by two 18650 batteries and has a game-style design that feels comfortable in hand. The range is great, you shouldn’t worry about losing the radio link before the video signal, which is typically the main range limitation.
FPV Goggles
While basic, the included FPV goggles provide a decent viewing experience. Compact and lightweight, these goggles offer adjustable focus for nearsighted and farsighted users, though they lack a DVR function, which is a significant drawback if you want to record your flights.
In terms of comfort and immersion, they aren’t on par with mid to high-end alternatives, but they are sufficient for beginners. They are also quite small, which might work well for younger pilots. Even after upgrading to better goggles, these can still be useful for spectators.
For FPV goggles recommendations, see this post: https://oscarliang.com/fpv-goggles/
With this radio and goggles setup, the range is better than expected. I could fly around 300-400 meters away and still maintained reliable video and radio links. However, I didn’t push it further, as losing it in dense bushes could make it hard to find, especially since it’s so tiny.
Battery Charger
The kit includes a basic non-smart charger that handles 2S and 3S LiPo/LiHV batteries via the balance connector. It charges one battery at a time, which can take 20 minutes to half an hour. If you have many batteries, you might want to consider more advanced options. But for beginners, this charger gets the job done. For battery charger recommendations, see this guide: https://oscarliang.com/choose-lipo-battery-charger-power-supply/
Draknight vs. TinyHawk
When comparing the Draknight to other FPV drones in its class, like the Emax Tinyhawk Freestyle, it holds its own. While the Tinyhawk might be slightly lighter, the Draknight offers more durability and raw power, making it better suited for those who want to develop more aggressive flying styles. The aluminum top mount and sturdy construction suggest this drone can withstand frequent crashes. It also includes a beeper and functional LEDs, adding to its value as a versatile, ready-to-fly option.
Flight Performance
The Draknight is one of the best micro drones I’ve tested in 2024, hands down.
It’s super smooth, agile, and fast, making it ideal for freestyle flying. The motors and propeller combination is efficient, keeping the motors cool and the battery barely warm after flights, which is a testament to its quality build and tuning.
Despite its power, the Draknight is very quiet, making it ideal for flying in local parks without disturbing others. I was able to achieve around 6 minutes of aggressive flight time with the included 2S 720mAh battery, and up to 8 minutes with relaxed cruising.
With its strong design, good looks, built-in LEDs, and a buzzer to help locate it after a crash, the Draknight is a standout micro drone in 2024.
Main Complaints
While the FPV camera is adequate, its image quality falls short compared to other micros I’ve tested in the past year. It could benefit from a better camera for sure, but this isn’t a dealbreaker.
Another issue is the overly tight motor wires, which could lead to them disconnecting from the flight controller during flight. This happened to me, resulting in a rapid “roll of death.” The fix is simple—just unplug the motor wires, unwind the twisted motor wires a couple of turns, and plug them back in. If they become too loose, secure them to the arms with some cloth tape.
Setting Up and Flying
Getting started with the Draknight is straightforward. No binding is necessary—just charge the batteries, and you’re ready to fly. The radio is paired with the drone out of the box, with all the buttons and switches needed for a complete FPV experience, including mode selection (angle, horizon, and acro) and a beeper switch for finding your drone after a crash.
For beginners, I recommend starting in angle mode, which keeps the drone stable and easy to control. If you wish to fly in acro mode, practice in simulators first. The included ELRS dongle allows you to practice on FPV simulators using the radio wirelessly.
Original Betaflight CLI Diff can be found here.
Conclusion
The HGLRC Draknight RTF bundle is an excellent choice for those looking to start flying freestyle. It offers a great balance of durability, power, and versatility, making it a strong contender in the beginner FPV drone market. Whether you’re just starting out or looking to grow your skills, the Draknight provides a solid platform to learn and have fun with. Alternatively, if you already have your own radio and goggles, the standalone Draknight 2-inch drone is also highly recommended.
You can get the HGLRC Draknight kit/quad here:
- AliExpress: https://s.click.aliexpress.com/e/_DeRjVXt
- Banggood: https://oscarliang.com/product-0z2e
- Amazon: https://amzn.to/3MkkbGz
3 comments
Got my rtf set today, and i also noticed the tight wires, thanks for preventing at least 1 thing.
You say no setup? Didnt try yet, the equipment is getting to room temperature, before i Got lightning because of dew on the cold parts..
Why i ask, in reviews i see binding 3xin out,
Im a bit afraid, in the scanned almost impossible to read manual i saw betaflight things, and i ordered this because im fighting in betaflight, after 6 months struggle on my mk4 build from seperate parts, got stuck on the betaflight, and all the people who help and give tips are awesome, but all on distance, en no shops or possibillities to “configurated ” by expirient person..really unbeleavable..
Im analog Danny, 48,and since the beginning of computers had an hate hate relationship with them..
So i really hope, that when i throttle up, the motors (without props inside) ,will turn..
That is the thing missing in my build..
Greetings from the netherlands, and will let you know how it fly’s🙂🙃✌️
Hello Oscar!
Any suggestions to reduce propwash?
Thanks
Check out my guide on this: https://oscarliang.com/propwash/