So you are new to FPV Drone and wondering where to start? You have come to the right place! This beginner’s guide explains the basics of buying, building and flying an FPV drone.
How to Get Started with FPV Drone
Tag Archives: beginners
DJI FPV System FAQ – Common Issues, Questions and Tips
Here are some of the most commonly asked questions about DJI FPV Goggles, Air Unit, Caddx Vista and Remote Controller. I will keep adding to this list as a knowledge base so we can all find the answers easily.
F1, F3, F4, F7 and H7 Flight Controller Explained
F1, F3, F4, F7 and H7 are the different processors in racing drone flight controllers. This article explains the differences between these MCU, the advantages and disadvantages and help you decide which FC to get.
How to Edit DJI OSD Subtitle Files (.srt)
I made this simple tool for editing OSD data (.srt subtitle files) from DJI FPV system, it allows you to easily remove unwanted data, and change data labels.
How to Fix SD Card Warning in OpenTX
If you get “SD Card Warning” on OpenTX radio (Taranis, Jumper T16, TX16S etc), here is a quick fix. This is usually caused by outdated file content on the SD card after updating firmware.
Using CLI Commands to Set Betaflight OSD Element Position (DJI and Analogue)
Every time you update Betaflight or setup a new quad, you have to re-configure the OSD, rearranging element positions, isn’t that annoying? Well, you can actually save your OSD config, and just copy and paste it in CLI. Works for both analogue and DJI FPV systems.
The Best 5.8GHz Antenna for FPV Drone
FPV antenna is the deciding factor that determines the range and signal strength of your FPV system. This guide will explain the basics of 5.8Ghz antennas used on mini quad VTX and VRX, and hopefully it will help you choose the best FPV antenna.
The Best Soldering Tools for Building FPV Drones
This post outlines my favourite soldering iron, solder, and soldering related tools, and I will explain in great detail what kind of solder you should buy. Having the right equipment makes soldering and building FPV drones much more enjoyable.
Fixing Channel Map in Betaflight and OpenTX
Channel mapping is basic but confusing for FPV drone beginners. If you get it wrong, the channel outputs in Betaflight will respond to the wrong sticks. Here is how to fix Channel Map configuration, and how to set it up properly.
Must Have USB Adapters and Cables for FPV (Magnetic / 90-degree)
USB ports on flight controllers can be difficult to access in some frames, such as cinewhoops. Here are some useful USB adapters and cables that might help !
Brushed vs Brushless Tiny Whoops: Which Is Better?
Most people enter the FPV hobby by either learning in simulators or flying a Tiny Whoop. There are two types of whoops, brushed and brushless which could be confusing. In this article I will explain the pros and cons and which one you should get.
How to Upload Custom Logo in Betaflight OSD
You can make and upload your custom logo in Betaflight OSD. I will show you how to do it in this tutorial. You can also display your logo whenever you arm your quad.