Here is a list of tools and drones that I frequently use. Note that I am not sponsored by any company, I only recommend products based on my experience.
My Daily Tools and Gear for FPV Drone
Tag Archives: tools
Review: TS80P Soldering Iron // Better than TS80?
It’s been a year since I bought the portable TS80 USB soldering iron, finally Miniware has released the upgrade version – TS80P. Here is an overview of the specs and new features, and whether or not it’s better than the old TS80 and worth upgrading to.
Review: Wowstick Electric Screwdriver
In this review I will explain how the Wowstick electric screwdriver compares to my good old ES120 and whether it’s worth getting. I will focus on user experience and not waste time on the specs or how it works, you can find these out in the manual.
Build a DIY Solder Smoke Extractor for Under $20!
I will show you how to make a simple solder fume extractor for $20 or less! It’s easy to build and keeps the air in your work space fresh when soldering.
Review: TS80 Soldering Iron, Better Than TS100?
The company that makes one of the best portable soldering irons, the TS100, has recently released a new model, the TS-80! In this review we will take a look at the new features of the TS80, and whether it’s better than the TS100.
Brushed Motor ESC / Testing Tool
With this 1S brushed motor ESC, you can run a brushed motor directly, and control the speed using PWM signal from a radio receiver. This is a great tool for testing motors of brushed quads and tiny whoops, as well as micro RC planes and boats.
Tools and Materials for Building FPV Wings
Here is a list of useful and essential tools for building FPV wings and planes: including the many types of glue and tape, materials and spares parts. Some of the stuff are not necessary but will make building and flying wings much easier, enjoyable and reliable.
E6000 Glue For Building and Repairing RC Models
E6000 is great for building and repairing RC models. whether it’s foam planes and wings, or flexible plastic tiny whoop frames, it just works!
Review: Hobbyking 3-Channel Video Switcher
I’d like to re-introduce something really old, not many people know about but can be very useful and fun – the Hobbyking 3-channel video switcher. I have plans using it on an RC airplane so I bought one to see how it works.
Hanging Quads and FPV Wings on the Wall
I was looking for a way to hang my mini quads and FPV wings on the wall. This would save so much space and is also nice way to display my collections. Thanks to the suggestions from my Facebook group, I found the perfect solution – 3M Command Utility hooks!
Review: Lantian 400W 24V Power Supply for LiPo Chargers (Q6)
A lot of LiPo chargers like the Q6 cannot reach their maximum output power and current when you’re running it at low voltage such as 12V. To get the most out of your Q6 charger, you need a 24V power supply.
Power Supply for TS100 Soldering Iron – Activating God Mode!
I recently found an awesome power supply for the TS100 I’ve to share with you guys! When I first got the TS100, I was powering it with a 4S LiPo. The performance was okay, I wasn’t blown away by it. That’s because at 16V, you are only using 45% of the power. To get the most out of it you should really use 24V.