Holybro released a very small VTX recently, it’s designed specifically for racing drones and micro FPV drones. Let’s find out what’s special about it and how well it performs.
In this article I will share some tips on how to avoid and fix FPV video issues. They way you connect and power VTX and FPV camera affects how clean the video signal is. With good practices you can minimize noise in the FPV feed.
This is a review of FuriousFPV’s True-D 2.4GHz Module, and . While we were testing this system, we also ran some tests against the 1.3GHz FPV setup to see how they compare in terms of performance in the same condition.
If you fly alone or in small groups, then there is absolutely no point spending so much money on VTX’s with fancy names. I recently tested the Eachine TX805, and I think it’s one of the best value VTX’s you can get in 2019.
There are more than 40 channels you can choose from in a video transmitter (VTX), some times even up to 72 channels. It can be confusing for a beginner as which VTX channel is best to use. The choice comes down to if you fly with other people.
Not getting enough FPV range on 5.8GHz? This guide will explain the many aspects of using 1.2GHz – 1.3GHz video transmitters (VTX) and receivers (VRX) to get longer range. It will take you through selecting gears and some tips for optimal performance.
If you want to record your FPV flight from your camera without all the signal breakup, then you might want to check out the Speedybee DVR VTX! It’s basically a 600mW video transmitter with a built-in DVR (digital video recorder).
The Speedybee TX500 is a video transmitter you can mount in a 20x20mm FC stack. It also has built-in mic, VTX control and some other features that you might want to consider.
Few months ago, I tested the Foxeer ClearTX V1, but the output power was way below spec, I was getting less than 5% of the rated power. Not sure if it was a defective unit, before I could get a replacement they already released a new version – the ClearTX 2, that’s what we are going to check out in this review.
In this article I will show you how to build a 1.2GHz/1.3GHz to 5.8GHz wireless relay (repeater). It’s an ancient idea but a powerful DIY hack that can bring various benefits to your FPV experience if you are a 1.3GHz user.
Is this possibly the most popular 1.3GHz VTX for long range flying on a fixed wing and plane? Let’s check out the 1.3GHz 400mW VTX from ReadyMadeRC.
The Nano Cricket 5.8Ghz VTX by ReadyMadeRC is probably the smallest video transmitter I’ve seen that is capable of 200mW output power. Let’s take a close look at its performance in this review.