Drone Builds

This frame is reviewed by Artur B. Liquid frame from FlyingLemon is a mini quad frame designed for 5” props.

Finally I finished building my Airhog 180 Mini quad frame, at the same time I tested the Dragonfly 2206 2800KV motors in this build.

Winter is coming! And if you are sick of flying FPV simulators, then you should consider building an indoor FPV micro quadcopter!

Spent one whole day building this new Catalyst Speed Addict Racing Quad! And it looks absolutely fantastic!

Finally I finished building the ZMR250 V2! It’s kind of a rebuild as I simply migrated most of my components from my old ZMR mini quad. However I am using some new FPVModel 2206 motors and DYS …

I was very excited to build this Demon EVO250 quadcopter, as this is going to be a powerful mini quad setup: running 6045 propellers on 4S.

Not long ago we reviewed the XElites 180 Mini Quadcopter Frame. It was a long wait for the motors to arrive, but we finally made it!

I was having a tough time deciding what parts to put into this frame. I have always wanted to build a mini quad that runs 20A ESCs and 6045 props on 4S, for some serious …

This page is written by a group member who entered our build log contest. We are sharing the info hope it would be useful to someone. This project was initiated to convince me that everything …

This page is written by a group member who entered our build log contest. We are sharing the info hope it would be useful to someone. This mini quad frame is completely built using 3D …

This page is written by a group member who entered our build log contest. We are sharing the info hope it would be useful to someone. Hi all – here’s my entry for the build …

This page is written by a group member who entered our build log contest. We are sharing the info hope it would be useful to someone. This is the third time I rebuild this tricopter… …