The Helix is set apart from other current mini quad frames on the market, being sold as a partial kit which includes custom made FC/PDB and VTX/OSD systems. It follows a common true-X layout, but …
Reviews
-
-
QAV-ULX is a 5″ mini quad racing frame by Lumenier. It’s designed to use as little material as possible (thus the skinny arms), and the result weights only 45g!
-
Connex Prosight is one of the first HD solutions for FPV flying and racing. Is it the future of drone racing.. maybe? Let’s find out in this review.
-
The BeeBrain V1 is the first custom designed flight controller to fit the Blade Inductrix (AKA Tiny Whoop). It can run both Cleanflight and Betaflight, allowing the user to adjust PID and fly in full …
-
I wanted to review this Eachine TX01 VTX/Camera combination, because it can potentially be used on brushed micro quads such as the Tiny Whoop, and only half the price as a FX797/FX798.
-
In the summer, grass are tall and everywhere, it’s hard to find a flat, clear spot where you can take off without obstructing the propellers. With the help this take-off/landing pad it’s made my life easier.
-
In this post we will compare 4 popular mini quad (micro quadcopter) frames that runs 3″ propellers.
-
The Aomway HB25T is a camera built-in 5.8Ghz VTX that meets anyone’s compact FPV needs.
-
I reviewed the iSDT SC 620 500W battery charger, which is going to replace my good old Accucel-6. Features including XT60 power input connectors and max 20A charge current.
-
The Foxeer Arrow HS1190 FPV camera is probably the only camera on the market that provides voltage OSD capability. And in this review we will check out the performance and how it compares to the …
-
We have tested the new Cobra Champion 2205 2300kv motors. This review is purely based on flying experience and impression about these motors, thrust data was not measured.
-
I got this RCbenchmark 1520 thrust stand to replace the Turnigy thrust stand I have been using for my motor, ESC and propeller testing. Here is a quick comparison and review.