mini quad

In this article we will review & build the Zuul Racehound V2 frame (Hovership), which is a H mini quad frame with replaceable arms.

In this review & build log, we have the Lumenier QAV-X racing mini quad frame 4mm version.

We recently received a set of these SE2008 2550KV motors from DYS. What’s interesting is the smaller stator diameter of 20mm instead of the common 22mm. I also run it on my thrust stand to…

In this post we tested a new player in mini quad motor, the Tornado T1 2205 2600KV motor by BrotherHobby.

The Shuriken 180 is a medium priced racing/freestyle ARF (almost ready to fly) quadcopter, that would be great for indoor/outdoor flight. In this review we will take a look at the quality, how it flies, and how…

We reviewed the 5 inch Menel Mini Quad frame not long ago, now let’s take a look at it’s little brother, the 3″ Menel X3 from Hibernagen.

The DYS Lightening X220 is a neat ARTF package. It comes with pretty much everything you need to start flying FPV. In this review we will discuss the pros and cons about this racing mini quad.

We have tested the newly released Cobra motors: 1806 2800kv and 2204 2850kv designed for smaller (150-180) frames and 4″ props. The tests was purely based on flying experience, with different props / frame sizes etc.…

I needed a frame to test BLHeli_S and the Hibernagen Menel X 5 looks like a good frame for the task. It has a minimalist design and very light weight. In this review/build log we will look into…

Most of my flight time was spent on flying FPV, and my LOS (line of sight) skill is terrible. So I decided to build a LOS quadcopter to practice with.

Konrad shares his experience on how to save space in a mini quad tight build by lowering the FC/PDB stack as much as possible.

Armattan’s done an excellent job developing both the F1 series and Fusion 5 frames. It’s great to have the opportunity to review the limited edition frame from Armattan, the “Fusion 5”. At the moment, there’s only…