Channel mapping is basic but confusing for FPV drone beginners. If you get it wrong, the channel outputs in Betaflight will respond to the wrong sticks. Here is how to fix Channel Map configuration, and how to set it up properly.
The Jumper T16 is officially supported by OpenTX, and finally the stable firmware was released before the end of 2019. In this tutorial I will show you how to flash your T16 and T16 Pro with OpenTX firmware.
You can use OpenTX Companion to transfer model profiles from an old radio to your new radio, or restore backup to existing radios, here is how.
Here is how to update bootloader in the Taranis in a few easy steps. The first thing you want to do is to check what bootloader version you have.
If your quadcopter is too powerful, you can reduce power or the maximum throttle so you can fly more comfortably. This is very useful for people flying indoor, or racers flying very technical tracks. Read More
A flying wing needs mixer setting up in your radio for Aileron and Elevator to work correctly. Using flight controller you might not need to worry about this, but without an FC you’ll have to set this up manually.
In the newest version of OpenTX, a new dialog box has been added when you try to bind a Frsky receiver to your Taranis. There are four options, “Channel 1-8 or 9-16, and Telemetry On or Off. This article will explain what these options mean.
One benefit of setting up GPS on a drone is to get real time GPS coordinates – so when you crash you can track down your model. You could display them in your OSD, but that’s only useful when you have video signal or to look back in the DVR. In this guide I will show you how to record GPS coordinates inside the Taranis.