The TS100, possibly the best portable soldering iron for quadcopter builders, arrived in the mail and we tested it in a couple of mini quad builds. In this review we will have a look at why this solder iron is so great.
The Matek F405 AIO FC is a PDB-integrated flight controller that is able to run 32K/32K with DShot1200 in Betaflight 3.2.
I received the LSX5 Leopard mini quad frame by GEPRC for testing. It’s been a popular frame on social media, let’s check it out.
The Eachine Goggles Two is review by IntoFPV member “Tom BD Bad”. Many thanks to BangGood for providing this item for the review.
The Realacc Strange Third Hand is a soldering helper and is a great tool for any quad build you need to do.
I wanted to review this Eachine TX01 VTX/Camera combination, because it can potentially be used on brushed micro quads such as the Tiny Whoop, and only half the price as a FX797/FX798.
I reviewed the iSDT SC 620 500W battery charger, which is going to replace my good old Accucel-6. Features including XT60 power input connectors and max 20A charge current.
The Eachine E010 is an affordable Inductrix Clone, with the same mod you can turn it into something similar to a Tiny Whoop, but much cheaper.
There are many AIO FPV setup out there that includes both camera and VTX. Today we are testing the Eachine EF-01.
Most of my flight time was spent on flying FPV, and my LOS (line of sight) skill is terrible. So I decided to build a LOS quadcopter to practice with.
Because of the lack of suitable radio receiver (always out of stock), my brushed micro quadcopter build with the Lulfro FC was left unfinished in my spare box. But finally I found a good RX alternative that fits perfectly in a micro quad, and here I share how it was completed.