This tutorial explains how to install and setup TBS Crossfire for the TX16S, T18, T16, and the Taranis X9D+. I will show you how to connect Crossfire receiver to flight controller and configure it in Betaflight. The same steps apply to other OpenTX radios.
This buyer’s guide explains the basics of radio transmitters for FPV drone. Apart from price, the supported frequency and protocols and the number of channels, there are a lot more to consider when buying a TX.
The new TX16S from Radiomaster looks highly similar to the Jumper T16 at first glance, but it’s made by a different company and has different specs and features. Is it a better radio or just a cheap clone? Let’s find out.
There are more than one way to hold your radio sticks, and you could have been holding them wrong the whole time! You can pinch, or just use your thumbs. The debate of which way is best will perhaps never end, but you should explore and find your own style.
Here I will list some of the upgrade parts and accessories for the Jumper T16 / T16 Pro. Feel free to let me know if there are custom parts that I am missing here!
To take advantage of the TX16S, T18 and T16’s beautiful color screen, you can upload your very own custom splash image, background image and model images. In this tutorial I will show you how to install these images in the T16.
This tutorial walks you through how to setup the Jumper T16 radio for the first time. I will explain the every aspect of using the T16, from user interface, software to hardware, as well as beginner to advanced tips and tricks.
Here is a little trick that many people don’t know about the Jumper T16 – you can fully customize the color and interface layout of the home screen!
When I was wondering why Jumper took down the product page for the T16, I discovered they are about to release a new radio – the Jumper T16 Pro.
Frsky released a new Taranis X9D+ 2019 radio! It has the same classic X9D+ shell with upgraded hardware and additional features. But is it as good as the original, and should you upgrade? Let’s find out!
Although the Jumper T16 is running JumperTX firmware which is forked from OpenTX, firmware update procedure is completely different. Instead of using OpenTX Companion, you will have to flash your T16 using SD card. In this tutorial I will show you how.